HOW TO INSTALL THE EXHAUST PIPE OF THE CIARRA RANGE HOOD

How to install the exhaust pipe of the CIARRA range hood

How to install the exhaust pipe of the CIARRA range hood

Blog Article

Installation steps of the exhaust duct of the CIARRA range hood and the


installation of the air outlet cover


1. First of all, you need to install a check valve at the entrance of the public flue, and then tighten


the screw to fix the check valve. Of course, the function of the check valve is to prevent the


backflow of oil smoke, so whether it is the public flue of the exhaust pipe channel or the outdoor


perforated channel A check valve needs to be installed.


2. Then connect the exhaust pipe of the CIARRA range hood with the installed check valve. First,


place the exhaust pipe of the range hood above the check valve, and then set it vertically down


on the interface of the check valve.


3. Then seal the connection between the exhaust pipe of the CIARRA range hood and the check


valve, and continue to seal with heat-resistant strong point tape or electrical tape.


4. Since there is a valve plate on the check valve to adjust the size of the exhaust port, do not use


screws or drill holes to fix the exhaust pipe when sealing, so as not to block the valve plate of the


check valve, so that the oil fume cannot be excluded.


5. The length of the standard exhaust pipe is 150cm; if you want to lengthen the exhaust pipe,


please seal it with sealing tape when connecting 2 exhaust pipes; and do not flatten the exhaust


pipe of the CIARRA range hood, and control the curvature of the exhaust pipe of the CIARRA


range hood as much as possible Around 90 degrees, and try not to turn too much.

CIARRA Appliances

Report this page